Argon arc welding automatic wire feeder can be matched with any performance argon arc welding machine as well as a variety of argon arc welding gun, gun clip 360 degree adjustable, included Angle design adjustable (similar products in the market included Angle is not adjustable).When working in linkage with the welding machine, the wire feeding is even and stable, the wire feeding speed is adjustable from 0.15-6 m/min, and the anti-sticking wire automatic reverse pumping function enables the customer to use freely, accurately position, and weld the workpiece with high difficulty such as brazing and spot welding.

Argon arc welding automatic wire feeder with manual welding, skilled 3 days can reach the welding level of the old master, novice can also weld the technician level of uniform, smooth weld.When used with walking car, special equipment and automatic welding special plane, perfect automatic TIG welding can be achieved without additional programming.

Domestic argon arc welding automatic wire feeder generally has shortcomings:

One, welding machine high frequency lighting poor interference.

Second, with manual welding and automatic welding easy to adhere to the wire, especially with the use of automatic welding machine, the phenomenon of adhesion is particularly prominent.There is no function of stopping the wire first and then closing arc dissolving wire after delay.

Three, wire feeding speed when fast, weak wire feeding uneven.

Four, stop wire, wire feed switch function no.Such as manual welding, the need to first spot welding workpiece, spot welding does not need to feed wire, switch to stop wire state, spot welding and then pull welding, switch to feed wire state, continuous wire feed!The wire feeder on the market does not have this function.

Five, point to move back function no.During the debugging process, the welding wire was sent too much, and it had to be cut with pliers.

6. Various time Settings cannot be accurate to 0.01 second to 9.99 seconds

7. No wire feeding function in advance.Can not realize the first wire, welding machine back arc.

8. No braking function.There is inertia when the wire is fed to stop the wire, and there is inertia when the wire is drawn back to stop.